Spray Containment Unit

Avoid the mess.

The Nasarc Spray Containment Unit will help to reduce the amount of slag and anti-spatter residual left on the reamer and surrounding weld jigs, by managing the over-spray in its catch basin. A quick-fitting is available to connect a drain-line and direct the unused anti-spatter fluid to a convenient disposal site.

Product Data Sheet


Spray Containment Unit
  • Features and Benefits

    • The Spray Containment Unit consists of a cone and small reservoir which fits around the reamers existing spray nozzle.
    • Over-spray falls through a screen in the lower reservoir and through the drain-line to a catchment below.
    • The lower reservoir captures large bits of spatter on its internal mesh screen, and is easily removed to periodically empty its contents.
    • This unit may be added to existing reamers, or as an option on new orders.

  • Technical Data

    Dimensions:
    2.75” D, 4.0” H
    Drain Line Fitting Diameter:
    3/8″

  • Ordering Information and Accessories

    Assembly

    Spray Containment Assembly II
    IRS020099-00